Grass Valley K2 AppCenter v.7.2 - Manual (Page 53)

05 April 2010 K2 AppCenter User Manual
53
Previewing a clip that is recording
If the entered length is valid, longer than the amount of material already recorded,
the clip continues to record until it reaches the specified length or until you select
Stop
.
Using continuous record
You can configure Recorder for Continuous Record mode. Continuous record is
useful for applications that normally use Continuous Record, for example a manual
time delay. Refer to “About recording clips” on page 44 .
1. Click the Time Dome .
The Time Dome pop-up menu appears.
2. Choose
Continuous Record
in the pop-up menu.
The Time Dome changes to display continuous record. .
3. Click
Length
.
The Length dialog box appears.
4. Enter the clip length by typing only numbers, colons are added automatically.
5. Click
OK
in the dialog box, or press
Enter
.
6. Select the record button on the onscreen transport controls .
Recording continues until
Stop
is selected. While recording, the mark in and mark
out update with the current status of the clip. The Time Dome gives a visual
indication record progress.
7. Load and play the clip in Player/Recorder application:
• Drag and drop from the recording monitor pane to the playing monitor pane.
The play channel becomes the selected channel, and the clip is cued and ready for
play.
Previewing a clip that is recording
Preview loads the currently recording clip into a play channel. The play channel
becomes the selected channel, and the clip is cued and ready for play.