Grass Valley K2 AppCenter v.7.2 - Manual (Page 52)

52
K2 AppCenter User Manual 05 April 2010
Chapter 4 Recording clips
Scheduling a recording
This feature is part of the licensable AppCenter Pro option.
You can schedule a recording to start at a specified time. Scheduled Start Time uses
Time of Day timecode source, which can be driven by either the system clock or LTC.
VITC or Anc VITC/LTC cannot be used to drive the Time of Day.
To schedule a start time for a clip to play, see “Scheduling a clip to play” on page 68 .
1. Select
Control | Schedule Start Time
. Trigger At entry box appears.
2. Enter the time when you want the recording to start and click
OK
. The time of day,
trigger time, and a countdown are displayed.
Using Fixed Length record mode
You can specify the clip length before recording, or during recording. As long as there
is sufficient storage space, a fixed length recording continues until the clip length is
reached or until you select stop.
1. Verify video, audio, and other settings for your recording as explained in “Before
you record: Recorder settings checklist” on page 50 .
2. Select
Length
in the Recorder pane.
The Length dialog box appears.
3. Enter the clip length by typing only numbers, colons are added automatically.
4. Choose
OK
in the dialog box, or press
Enter
.
5. Select the record button on the onscreen transport controls .
Recording continues until
Stop
is selected or the desired length is reached. While
recording, the mark in and mark out update with the current status of the clip. The
Time Dome gives a visual indication of the percent complete as well as a
countdown from the specified length down to
00:00:00:00
.
Specify clip length after recording has begun
While a clip is recording you can enter the clip length as follows:
1. Select
Length
in the Recorder pane.
The timecode dialog box appears.
2. Enter the desired length, then select
OK
or
Enter
.