3d/video + key, About 3d/video + key, 3d/video + key requirements and restrictions – Grass Valley K2 AppCenter v.7.2 User Manual
Page 190
190
K2 AppCenter User Manual
05 April 2010
Chapter 13 ChannelFlex Suite
7. Configure remaining channel settings as appropriate. Refer to
.
3D/Video + Key
The features in this section are part of the ChannelFlex Suite, which requires the
AppCenter Elite license.
This section is divided into the following topics:
•
•
“3D/Video + Key requirements and restrictions”
•
About 3D/Video + Key
This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite
license.
You can connect SDI IN1 and SDI IN2 on a K2 Summit/Solo channel to use the 3D/
Video + Key feature. SDI IN1 is Video or Left Eye. SDI IN2 is Key or Right Eye. To
record, you must configure the channel as a 3D/Video + Key record channel. The K2
system records a single 3D/Video + Key clip with two video tracks.
In a 3D/Video + Key clip, video track 1 is Video (or right eye) and video track 2 is
Key (or left eye). If ancillary data and/or timecode is present on SDI IN1, the 3D/
Video + Key clip contains that ancillary data and/or timecode. The clip’s audio is
recorded from SDI IN1. You can also create a 3D/Video + Key clip using the Add
Track feature. Refer to
“Adding a video or audio track” on page 182
In E-to-E (LoopThru) mode, SDI OUT1 and SDI OUT2 show the signals coming in
at SDI IN1 and SDI IN2 respectively. When in this mode or when playing a 3D/Video
+ Key clip, the VGA Video Monitor displays the two video signals, but at a smaller
size, in the area for the single channel.
When you play a 3D/Video + Key clip on a channel that is configured as a 3D/Video
+ Key play channel, SDI OUT1 plays the Video (or right eye) and SDI OUT2 plays
the Key (or left eye). When you play a standard clip on a channel that is configured
as a 3D/Video + Key play channel, SDI OUT2 plays a full Key (white). AppCenter
Playlist and Loop Play support 3D/Video + Key clips. A 3D/Video + Key play
channel supports playlist mode.
You can stream a 3D/Video + Key clip as GXF to/from other K2 Summit/Solo
systems.
3D/Video + Key requirements and restrictions
This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite
license.
4+4
The first four audio tracks on Input 1 go to
clip 1. The first four audio tracks on Input
2 go to clip 2.
AES audio tracks 1 – 4 go to clip 1. AES
audio tracks 5 – 8 go to clip 2.
Setting
Embedded audio
AES audio