Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 79)

INDIGO AV Mixer User Manual 79
Transition Main Menu
The figure above shows the typical parameters for a Wipe pattern:
• Width allows you to set the border width.
• Split allows you to set the proportion of inner and outer part of the
border.
The outer part is displayed in Matte 1 color, the inner part is displayed
in Matte 2 color. If Split is set to 0 % or 100 %, only one color is dis-
played.
• Softness allows you to set the softness of the border’s outer and inner
edges, and for the color crossing between outer and inner part.
Note If Width is set to 0 %, the border is turned off and only one edge is displayed.
The Softness of this edge is determined by the Outer value. Inner and Split
have no effect.
Note Matte 1 and Matte 2 have the same default colors. Some parameter changes
are only visible if different colors are set for Matte 1 and Matte 2.
SD Transitions
You can independently define transitions for the SD background and the
two SD keyers.
SD BGD
For the SD background, the following effect categories are available:
• Wipe
• Mix
• 3D
• Page Roll
• Page Turn
• Slide
• Squeeze
• Door