Grass Valley Indigo AV Mixer v.1.2.2 User Manual
Page 102

102
INDIGO AV Mixer
User Manual
Section 7 — Menus
Link
Links/unlinks an output’s left and right channel faders. If
Link
is on,
moving one fader automatically moves the other one.
This is also useful for balancing different left and right audio levels:
1.
Deactivate
Link
.
2.
Set left and right channel to the required levels.
3.
Activate
Link
.
Now you can turn the volume of the output up and down without the
need to compensate for the different levels.
This applies to the Main Out, Sub Out, Add Sub to Main, and
Phones Out
sections.
Add Sub to Main
Use these faders to mix the Sub-Mix to Main-Mix.
Phones Out
The Phones Out section offers some additional buttons:
•
Main
Allows you to hear the signals of the Main output on the headphones.
This button is only available if no channel PFL is active.
•
Sub
Allows you to hear the signals of the Sub output on the headphones.
This button is only available if no channel PFL is active.
•
PFL/AFL
Choose if you want to hear the signals of the Main and Sub outputs in
AFL or PFL mode on the headphones. These buttons are only available
if no channel PFL is active.
•
Channel PFL
This button is only available if at least one channel PFL is activated.
Press it to deactivate all channel PFL.
•
High
/
Mid
/
Low
Allows you to set the power of the phone amp to adjust it to your
studio headphone:
High
is 100%,
Mid
is 50% and
Low
is 25%.
Use the faders of the Phones Out section to gain up the signal, if necessary.