Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 137)

INDIGO AV Mixer User Manual 137
Setup Main Menu
Default All
Resets the assignments of all buttons.
Fader Assignment
In this section, you can assign the audio channels to the six faders on the
Audio Control Subpanel.
Figure 70. Assigning audio signals to faders on the Control Panel
To assign a fader to an audio signal:
1. Select the desired fader from the Fader list.
2. Select the audio signal’s source from the Sources list.
The entries in this list depend on your selection of the operation mode
in the
AUDIO submenu.
3. Press Assign .