Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 135)

INDIGO AV Mixer User Manual 135
Setup Main Menu
To change the delay settings for an input:
1. Select the audio input signal in the Mixer Inputs list .
The Video Sources list is displayed.
2. Select the Delay Units.
For Fields and mSec , a Delay parameter field is displayed which allows
you to set the delay in fields or milliseconds.
No Delay sets the delay to zero.
Auto Delay sets the delay automatically in sync with the video signal.
3. Set the delay in the Delay parameter field.
7.9.4 Control Panel Submenu
Use the buttons in the Parameter Navigation Area on the top to access the
following sections:
Calibration
In this section, you can perform the calibration of the following control ele-
ments:
• Audio Faders
• Joystick
• Touch Screen
• Transition Lever Arm (T-Bar)
Additionally, you can also enter the calibration mode of the Touch Screen
by pressing all four Digipots simultaneously.
For detailed descriptions on the calibrations, see Calibrations on page 155.