Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 60)

60 INDIGO AV Mixer User Manual
Section 5 — Basic Operation
5.3.6 Making a PiP (Picture in Picture) in SD Mode
This type of transition inserts a picture into the background scene. The
background remains unaffected.
Note The following example uses Key 1 in SD mode, but you can also use Key 2.
To make a PiP:
1. Select Key 1 [NEXT TRANSITION] .
If Auto Menu Delegation is unlocked, the KEYER menu is selected automat-
ically.
Key 1 [BUS DELEGATION] is selected automatically.
2. Make sure Key 1 [BUS DELEGATION] is selected.
3. Make sure KEYER main menu is selected.
4. Select the SD KEY 1 submenu and press Type .
5. Select PiP as Type.
6. Press the Source button and select the Fill source from the list.
7. Press Transform .
8. Make sure the Enable button is activated.
9. Adjust Top Corner, Bottom Corner, and 2D Size as desired to position
and resize the picture.
10. Press the Cut [KEY 1] or Mix [KEY 1] button.
– or –
Press the CUT or AUTO button.
– or –
Move the Transition Lever Arm to the opposite position.