Grass Valley iControlEdge v.1.20 Installation - Manual (Page 88)

84
Installation & Setup 33
5. In the Select site window, double-click EDGE:
6. In the Select page window, double-click the desired home page.
For instance:
• Home.mpf, if you have two 1600 × 1200 monitor
• HomeEDGE4.mpf, if you have a 4-input head-end and two 1600 × 1200 monitor
• Home1280x1024.mpf, for a single monitor with a resolution of 1280 × 1024
• Home_1600x1050x2.mpf, if you have two 1600 × 1050 monitors in Multiple Monitor
1
mode
• HomeEDGE4_1600x1050x2.mpf, if you have a 4-input head-end and two 1600 × 1050 monitors in
Multiple Monitor mode
The current version of iControl Edge includes three sets of pre-configured single-screen and
double-screen home pages: one set for systems with typically 4 set-top boxes, another one for systems
Note: You may see other versions of the EDGE Web site. These are backups of previous versions
that were saved when updating the Web site, and could be useful should you need to revert to an
older version.
1. Multiple Monitor mode is when you have two monitors connected to one PC and you expand your primary display to the sec-
ond monitor.