Grass Valley iControlEdge v.1.20 Installation - Manual (Page 38)

34
Installation & Setup 33
3. Click the iControl logo next to iControl services monitoring and configuration tool.
The Miranda Monitoring page appears:
4. Find the row corresponding to the Densité Manager service.
5. In the Start/Stop/Restart column, select the Auto check box, click the Start option button, and then
click Apply at the bottom of the page.
Adding Densité Communicator Services
To add a Densité Communicator service:
1. Open iControl Navigator, and double-click DensiteManager in the logical view.
Note: If you need to increase the number of Densité Managers, select the appropriate number
for your purposes from the list at the bottom of the page, before clicking the Apply button next
to it.
Click the logo
Densité Manager
Service
Click Apply