Grass Valley iControlEdge v.1.20 Installation - Manual (Page 27)

Configuring the Network
23
The Webmin home page.
Configuring the Network
When configuring your network you must configure host addresses, DNS client, Gateway, and network
interfaces in the proper sequence.
To configure the network:
1. Specify the DNS settings to be used by your Application Server (see “Specifying DNS Client Settings” on
page 24).
2. Configure your host addresses (see “Configuring Host Addresses” on page 26).
3. Specify a network gateway to be used by your Application Server (see “Specifying a Network Gateway”
on page 27).