Grass Valley iControlEdge v.1.20 Installation - Manual (Page 70)

66
Installation & Setup 33
TYPE The device type. Mandatory. Choices are:
AS = Application Server
DENSITE = Densité Housing Frame
ALLEGRO = Allégro Streaming Encoder/Server
ACP1721 = ACP-1721 Digital Audio Control Probe
VCP1021 = VCP-1021 Composite Control Probe
DEC1002 = DEC-1002 10-Bit Composite to SDI Decoder
UAP1781 = UAP-1781 8-Channel Universal Audio Processor
DEC1003 = DEC-1003 10-Bit Composite to SDI Decoder with Probing Option
UAP1783 = UAP-1783 8-Channel Universal Audio Processor
DEC1023 = DEC-1023 12-Bit 3D Composite to SDI Decoder with Probing
AAP1741 = AAP-1741 4-Channel Analog Audio Processor
HCP1801 = HCP-1801 HD/SD Video Control Probe with Embedded Audio
SCP-1121 = SDI Control Probe with Embedded Audio
GC100 = Global Caché GC-100 Network Adapter
STB = Set-Top Box
DVR = Digital Video Recorder
VIRTUAL = Represents a Densité probe and the associated cycling profiles
CYCLER = Defines a cycling profile and associated alarm debouncing parameters
ENABLE Type “YES” to enable a device, “NO” to disable it for troubleshooting or
maintenance. A disabled device remains defined in the system, but does not
participate in monitoring/control operations. In the corresponding Web page,
alarms associated with a disabled device will appear in black (i.e. their state will
be considered unknown).
IP Unique IP address of the device. Mandatory.
HOSTNAME Host name of the Application Server (default value is “Show”). Case sensitive.
Mandatory.
NAME The name of a Densité frame.
APP SERVER ID ID of the associated Application Server (e.g. “APPSERVER1”). Case sensitive.
Mandatory.
DENSITE ID ID of the associated Densité frame (e.g. “DENSITE1”).
SLOT Slot number (1-20) where the card is located inside the associated Densité
frame.
PORT Active port number on a GC-1O0 network adapter. Must be “4998”.
GC100 ID ID of the GC-100 network adapter associated with a specific set-top box.
Column Description