Specifying dns client settings, See “specifying dns client settings” on – Grass Valley iControlEdge v.1.20 Installation User Manual
Page 28
24
Installation & Setup
33
4. Configure the Ethernet interface (see “Configuring the Ethernet Interface” on page 29).
5. Restart the system and verify the configuration (see “Restarting the System and Verifying the
Navigating to the Network Configuration Page
Make sure you fulfill the following conditions before beginning this procedure:
• You you have launched iControl (see “Connecting to the Application Server” on page 20).
• You are logged on to iControl Webmin (see “Logging on to Webmin” on page 22).
To navigate to the Network Configuration page:
•
On the Webmin home page, click Network Configuration:
The Network Configuration page appears:
Specifying DNS Client Settings
The Domain Name Service (DNS) is a type of directory service that translates host names to IP addresses
and vice versa. For the most part, Application Servers and other devices on an iControl network rely on IP
addresses, and so DNS is not usually needed. There are, however, circumstances where DNS is required, such