Grass Valley iControlEdge v.1.20 Installation - Manual (Page 86)

82
Installation & Setup 33
Step 10: Launching the iControl Edge Web Site
The iControl Edge system is designed to be ready for operation from the moment the initial setup is
completed. When the Application Server at the central monitoring location, and all remote Application
Servers, Densité frames, GC-100 network adapters and Allégro systems are configured and online, an
operator with network access can get started simply by launching the iControl Edge Web site.
To launch the iControl Edge Web site:
1. From a client PC or laptop on the same network as the Application Server, open a Web browser and type
the Application Server’s IP address in the address bar.
The iControl Startup Page appears:
2. Click iC Web.
Note: The iControl Edge Web site can be accessed from any PC or laptop on the same network
as the Application Server. iControl Edge offers several pre-configured versions of its main Web
page. Choose either a dual-screen or a single-screen layout, with the appropriate resolution for
your client PC or laptop.