Grass Valley iControlEdge v.1.20 Installation - Manual (Page 40)

36
Installation & Setup 33
4. Repeat this procedure until you have added Communicator services for every Densité frame in your
iControl Edge configuration.
Configuring the Probing Features
For each Densité module in your iControl Edge configuration, you need to enable thumbnail streaming and/
or audio level meters. You must also configure the appropriate video and audio alarms for your monitoring
purposes, and disable all logging to avoid filling the system logs with irrelevant entries.
Enabling Thumbnail Streaming
To enable thumbnail streaming on a video probe:
1. In iControl Navigator, select the Densité card you wish to configure.
2. On the View menu, click Show control panel, to open the card’s control panel.
3. Click the control panel’s Thumbnail tab.
4. Under Enable, click Video.
5. Under Size, click Large.
6. Select Fast from the Rate list.
See also: For more information about Densité Communicator services (also called Densité Frame services),
refer to the “Configuring Devices & Services” chapter in the iControl User Guide (see “Reference
Material” on page 6).
Communicator service