H3C Technologies H3C SecBlade LB Cards - Manual (Page 96)

85
A username configured on the RADIUS server is in the format $enablevel$, where level specifies
the privilege level to which the user wants to switch. \
Figure 34 Configuring a username for privilege level switching (take $enab1$ for example)
Figure 35 List of the usernames for privilege level switching
3. Verify the configuration.
After the configuration is complete, the user can Telnet to LB and use username test@bbb and
password aabbcc to enter the user interface of LB, and access all level 0 commands.
telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.70 ...
******************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved. *