Enabling tcp proxy for a security zone, Adding a protected ip address entry, Enabling tcp proxy for a security – H3C Technologies H3C SecBlade LB Cards User Manual
Page 244: Zone, N in, Figure 125
233
Figure 125 TCP proxy configuration
Enabling TCP Proxy for a Security Zone
1.
From the navigation tree, select Security > Intrusion Detection > TCP Proxy Configuration to enter
the page as shown in
.
2.
In the Zone Configuration area, click Enable to enable the TCP proxy feature for a target zone.
The icon in the Status column changes to , which indicates that the TCP proxy feature is enabled.
You can click Disable to disable the feature.
The icon indicates that the TCP proxy feature is disabled.
Adding a protected IP address entry
1.
Select Security > Intrusion Detection > Protected IP Configuration to enter the page shown in
.
The page lists information about protected IP address entries and the relative statistics.
Figure 126 Protected IP address entries
2.
Click Add to enter the page for configuring a protected IP address entry.