H3C Technologies H3C SecBlade LB Cards - Manual (Page 18)

7
Figure 2 Security zone management page
2. Click Add.
Figure 3 Creating a security zone
3. Configure the security zone as described in Table 1 .
4. Click Apply.
Table 1 Configuration items
Item Description
Zone ID Specify the zone ID.
Zone Name Specify the zone name, which cannot be any.
Preference
Set the preference of the security zone.
By default, packets traveling from a higher priority security zone to a lower priority
security zone or between two security zones of the same priority are allowed to pass
and packets traveling from a lower priority security zone to a higher priority security
zone are not.
Share Specify whether the security zone can be referenced by other VDs.
Adding members to the security zone
1. Select Security > Zone from the navigation tree to enter the security zone management page
(see Figure 2 ).
2. Click the icon for the security zone.