H3C Technologies H3C SecBlade LB Cards - Manual (Page 189)

178
Figure 81 Specifying the private key file
e. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in Figure 82 , you can log in to the router through the Stelnet client running on the LB. The router
acts as the Stelnet server and uses password authentication. The username and password of the client are
saved on the router.
Figure 82 Network diagram
Configuration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
system-view