H3C Technologies H3C SecBlade LB Cards - Manual (Page 181)

170
Terminating the connection with the SFTP server
Step Command Remarks
1. Enter SFTP client view.
For more information, see
"
Establishing a connection to an
SFTP server ."
N/A
2. Terminate the connection with
the SFTP server and return to
user view.
• bye
• exit
• quit
Use any of the commands.
These three commands function in
the same way.
Configuring the device as an SCP client
This section describes how to configure the device as an SCP client.
SCP client configuration task list
Task Remarks
Enabling and disabling first-time authentication Optional.
Transferring files with an SCP server Required.
Transferring files with an SCP server
Task Command Remarks
Connect to the SCP
server, and transfer files
with the server.
• Upload a file to the SCP server:
scp [ ipv6 ] server [ port-number ] put source-file-path
[ destination-file-path ] [ prefer-compress { zlib |
zlib-openssh } | prefer-ctos-cipher { 3des | aes128 |
des } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
• Download a file from the SCP server:
scp [ ipv6 ] server [ port-number ] get source-file-path
[ destination-file-path ] [ prefer-compress { zlib |
zlib-openssh } | prefer-ctos-cipher { 3des | aes128 |
des } | prefer-ctos-hmac { md5 | md5-96 | sha1 |
sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] *
Use either command.