H3C Technologies H3C SecBlade LB Cards - Manual (Page 184)

173
Figure 75 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username and
password. After entering the username (client001) and password (aabbcc), you can enter the
CLI of the server.
Publickey authentication enabled Stelnet server configuration
example
Network requirements
As shown in Figure 76 , you can log in to the LB through the Stelnet client (SSH2) that runs on the host. The
LB acts as the Stelnet server, adopting publickey authentication and the RSA public key algorithm.
Figure 76 Network diagram
Stelnet client Stelnet server
Host LB
192.168.1.56/24
GE0/1
192.168.1.40/24