H3C Technologies H3C SecBlade LB Cards - Manual (Page 32)

21
Configuring ACLs in the Web interface
Recommended configuration procedure
Step Remarks
1. Creating an ACL .
Required.
The category of the created ACL depends on the ACL number that
you specify.
2. Configuring an ACL rule:
{
Configuring a basic ACL rule
{
Configuring an advance ACL rule
{
Configuring an Ethernet frame
header ACL rule
Required.
Complete one of the tasks according to the ACL category.
3. Configuring ACL acceleration .
Optional.
Necessary only when the ACL contains a large number of ACL
rules.
Only basic IPv4 ACLs and advanced IPv4 ACLs support ACL
acceleration.
ACL acceleration is not available for ACLs that contain a
non-contiguous wildcard mask, for example, 0.255.0.255.
After you modify an IPv4 ACL with ACL acceleration enabled,
disable and re-enable ACL acceleration to ensure correct rule
matching.
Creating an ACL
1. Select Security > ACL from the navigation tree.
Figure 11 ACL list
2. Click Add.