H3C Technologies H3C SecBlade LB Cards - Manual (Page 248)

237
Figure 132 Configuring global settings
Configuring blacklist
Recommended configuration procedure
Task Remarks
1. Enabling the blacklist function
Required.
By default, the blacklist function is disabled.
2. Adding a blacklist entry manually
Optional.
By default, no blacklist entries exist.
3. Configuring the scanning detection feature to
add blacklist entries automatically Optional.
By default, the scanning detection feature is disabled.
4. Viewing the blacklist Optional.
Enabling the blacklist function
1. From the navigation tree, select Security > Intrusion Detection > Blacklist.
The blacklist management page appears, as shown in
Figure 133 .
2. Select Enable Blacklist.
3. Click Apply.