H3C Technologies H3C S5560 Series Switches User Manual
Page 73
39
Step Command
Remarks
2.
Enter
aggregat
e
interface
view.
•
Enter Layer 2 aggregate
interface view:
interface bridge-aggregation
interface-number
•
Enter Layer 3 aggregate
interface view:
interface route-aggregation
interface-number
N/A
3.
Set the
minimum
number
of
Selected
ports for
the
aggregat
ion
group.
link-aggregation selected-port
minimum number
By default, the minimum number of
Selected ports is not specified for
an aggregation group.
4.
Set the
maximu
m
number
of
Selected
ports for
the
aggregat
ion
group.
link-aggregation selected-port
maximum number
By default, the maximum number of
Selected ports for an aggregation
group is 8.
Setting the expected bandwidth for an aggregate interface
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter
aggregat
e
interface
view.
•
Enter Layer 2 aggregate
interface view:
interface bridge-aggregation
interface-number
•
Enter Layer 3 aggregate
interface view:
interface route-aggregation
interface-number
N/A
3.
Set the
expected
bandwid
th for the
interface.
bandwidth bandwidth-value
By default, the expected
bandwidth (in kbps) is the interface
baud rate divided by 1000.
- H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module