Pvst configuration example, Network requirements – H3C Technologies H3C S5560 Series Switches User Manual
Page 142
108
0 GigabitEthernet1/0/2 ALTE DISCARDING NONE
0 GigabitEthernet1/0/3 ALTE DISCARDING NONE
3 GigabitEthernet1/0/1 ROOT FORWARDING NONE
3 GigabitEthernet1/0/2 ALTE DISCARDING NONE
4 GigabitEthernet1/0/3 ROOT FORWARDING NONE
Based on the output, you can draw each MSTI mapped to each VLAN, as shown in
.
Figure 32 MSTIs mapped to different VLANs
PVST configuration example
Network requirements
As shown in
, Device A and Device B work at the distribution layer, and Device C and Device
D work at the access layer.
Configure PVST to meet the following requirements:
•
Packets of a VLAN are forwarded along the spanning trees of the VLAN.
•
VLAN 10, VLAN 20, and VLAN 30 are terminated on the distribution layer devices, and VLAN 40
is terminated on the access layer devices.
•
The root bridge of VLAN 10 and VLAN 20 is Device A.
•
The root bridge of VLAN 30 is Device B.
•
The root bridge of VLAN 40 is Device C.
A
B
A
B
C
D
C
B
C
MSTI 1 mapped to VLAN 10
A
D
D
Root bridge
Normal link
Blocked link
MSTI 3 mapped to VLAN 30
MSTI 0 mapped to VLAN 20
MSTI 4 mapped to VLAN 40
- H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module