Configuring the advertisable tlvs – H3C Technologies H3C S5560 Series Switches User Manual
Page 277
243
To enable LLDP polling:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Layer 2/Layer 3
Ethernet interface view,
management Ethernet
interface view, or Layer
2/Layer 3 aggregate
interface view.
interface interface-type interface-number
N/A
3.
Enable LLDP polling and set
the polling interval.
•
In Layer 2/Layer 3 Ethernet interface
view or management Ethernet interface
view:
lldp [ agent { nearest-customer |
nearest-nontpmr } ]
check-change-interval interval
•
In Layer 2/Layer 3 aggregate interface
view:
lldp agent { nearest-customer |
nearest-nontpmr }
check-change-interval interval
By default, LLDP polling is
disabled.
Configuring the advertisable TLVs
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Layer 2/Layer 3
Ethernet interface view,
management Ethernet
interface view, or Layer
2/Layer 3 aggregate
interface view.
interface interface-type interface-number
N/A
- H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module