H3C Technologies H3C S5560 Series Switches User Manual

Page 262

228

[SwitchC-vlan203] vlan 303

[SwitchC-vlan303] arp detection enable

[SwitchC-vlan303] vlan 104

[SwitchC-vlan104] arp detection enable

[SwitchC-vlan104] vlan 204

[SwitchC-vlan204] arp detection enable

[SwitchC-vlan204] vlan 304

[SwitchC-vlan304] arp detection enable

[SwitchC-vlan304] vlan 501

[SwitchC-vlan501] arp detection enable

[SwitchC-vlan501] vlan 502

[SwitchC-vlan502] arp detection enable

[SwitchC-vlan502] vlan 503

[SwitchC-vlan503] arp detection enable

[SwitchC-vlan503] quit

# Configure the customer-side port GigabitEthernet 1/0/1 as a trunk port, and assign the port to
original VLANs and translated VLANs.

[SwitchC] interface gigabitethernet 1/0/1

[SwitchC-GigabitEthernet1/0/1] port link-type trunk

[SwitchC-GigabitEthernet1/0/1] port trunk permit vlan 101 102 201 202 301 302 501 to

503

# Configure many-to-one VLAN mappings on the customer-side port GigabitEthernet 1/0/1 to
map VLANs for PC, VoD, and VoIP traffic to VLANs 501, 502, and 503, respectively.

[SwitchC-GigabitEthernet1/0/1] vlan mapping uni range 101 to 102 translated-vlan 501

[SwitchC-GigabitEthernet1/0/1] vlan mapping uni range 201 to 202 translated-vlan 502

[SwitchC-GigabitEthernet1/0/1] vlan mapping uni range 301 to 302 translated-vlan 503

# Enable DHCP snooping entry recording on GigabitEthernet 1/0/1.

[SwitchC-GigabitEthernet1/0/1] dhcp snooping binding record

[SwitchC-GigabitEthernet1/0/1] quit

# Configure the customer-side port GigabitEthernet 1/0/2 as a trunk port, and assign the port to
original VLANs and translated VLANs.

[SwitchC] interface gigabitethernet 1/0/2

[SwitchC-GigabitEthernet1/0/2] port link-type trunk

[SwitchC-GigabitEthernet1/0/2] port trunk permit vlan 103 104 203 204 303 304 501 to

503

# Configure many-to-one VLAN mappings on the customer-side port GigabitEthernet 1/0/2 to
map VLANs for PC, VoD, and VoIP traffic to VLANs 501, 502, and 503, respectively.

[SwitchC-GigabitEthernet1/0/2] vlan mapping uni range 103 to 104 translated-vlan 501

[SwitchC-GigabitEthernet1/0/2] vlan mapping uni range 203 to 204 translated-vlan 502

[SwitchC-GigabitEthernet1/0/2] vlan mapping uni range 303 to 304 translated-vlan 503

# Enable DHCP snooping entry recording on GigabitEthernet 1/0/2.

[SwitchC-GigabitEthernet1/0/2] dhcp snooping binding record

[SwitchC-GigabitEthernet1/0/2] quit

# Configure the network-side port GigabitEthernet 1/0/3 to use the original VLAN tags of the

many-to-one mappings to replace the VLAN tags of the packets destined for the user network.

[SwitchC] interface gigabitethernet 1/0/3

[SwitchC-GigabitEthernet1/0/3] vlan mapping nni

This manual is related to the following products:

H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module