H3C Technologies H3C S5560 Series Switches - Manual (Page 278)

244
Step Command Remarks
3. Configure the advertisable
TLVs (in Layer 2 Ethernet
interface view).
• lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv [ ip-address ] }
| dot1-tlv { all | congestion-notification |
port-vlan-id | link-aggregation |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] | management-vid [ mvlan-id ] }
| dot3-tlv { all | mac-physic |
max-frame-size | power } | med-tlv { all
| capability | inventory | network-policy
[ vlan-id ] || power-over-ethernet |
location-id { civic-address device-type
country-code { ca-type ca-value }&<1-10>
| elin-address tel-number } } }
• lldp agent nearest-nontpmr tlv-enable
{ basic-tlv { all | port-description |
system-capability | system-description |
system-name | management-address-tlv
[ ip-address ] } | dot1-tlv { all |
congestion-notification | port-vlan-id |
link-aggregation } }
• lldp agent nearest-customer tlv-enable
{ basic-tlv { all | port-description |
system-capability | system-description |
system-name | management-address-tlv
[ ip-address ] } | dot1-tlv { all |
congestion-notification | port-vlan-id |
link-aggregation } }
By default:
• Nearest bridge agents
can advertise all types
of LLDP TLVs except the
DCBX TLV, location
identification TLV, port
and protocol VLAN ID
TLVs, VLAN name
TLVs, and
management VLAN ID
TLVs.
• Nearest non-TPMR
bridge agents
advertise no TLVs.
• Nearest customer
bridge agents can
advertise basic TLVs
and IEEE 802.1
organizationally
specific TLVs.
4. Configure the advertisable
TLVs (in Layer 3 Ethernet
interface view or
management Ethernet
interface view).
• lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv [ ip-address ] }
| dot1-tlv { all | link-aggregation } |
dot3-tlv { all | mac-physic |
max-frame-size | power } | med-tlv { all
| capability | inventory |
power-over-ethernet | location-id
{ civic-address device-type country-code
{ ca-type ca-value }&<1-10> |
elin-address tel-number } } }
• lldp agent { nearest-nontpmr |
nearest-customer } tlv-enable { basic-tlv
{ all | port-description |
system-capability | system-description |
system-name | management-address-tlv
[ ip-address ] } | dot1-tlv { all |
link-aggregation } }
By default:
• Nearest bridge agents
can advertise all types
of LLDP TLVs (only link
aggregation TLV in
802.1
organizationally
specific TLVs) except
network policy TLVs.
• Nearest non-TPMR
bridge agents
advertise no TLVs.
• Nearest customer
bridge agents can
advertise basic TLVs
and IEEE 802.1
organizationally
specific TLVs (only link
aggregation TLV).