beautypg.com

Verifying the configuration, Network requirements – H3C Technologies H3C S5560 Series Switches User Manual

Page 214

background image

180

2.

Configure GigabitEthernet 1/0/1:
# Configure GigabitEthernet 1/0/1 as a hybrid port.

[DeviceA] interface gigabitethernet 1/0/1

[DeviceA-GigabitEthernet1/0/1] port link-type hybrid

# Configure GigabitEthernet 1/0/1 to operate in automatic voice VLAN assignment mode.

[DeviceA-GigabitEthernet1/0/1] voice-vlan mode auto

# Enable voice VLAN on GigabitEthernet 1/0/1 and configure VLAN 2 as the voice VLAN for it.

[DeviceA-GigabitEthernet1/0/1] voice-vlan 2 enable

[DeviceA-GigabitEthernet1/0/1] quit

3.

Configure GigabitEthernet 1/0/2:
# Configure GigabitEthernet 1/0/2 as a hybrid port.

[DeviceA] interface gigabitethernet 1/0/2

[DeviceA-GigabitEthernet1/0/2] port link-type hybrid

# Configure GigabitEthernet 1/0/2 to operate in automatic voice VLAN assignment mode.

[DeviceA-GigabitEthernet1/0/2] voice-vlan mode auto

# Enable voice VLAN on GigabitEthernet 1/0/2 and configure VLAN 3 as the voice VLAN for it.

[DeviceA-GigabitEthernet1/0/2] voice-vlan 3 enable

[DeviceA-GigabitEthernet1/0/2] quit

Verifying the configuration

# Display the OUI addresses and their masks and descriptions.

[DeviceA] display voice-vlan mac-address

OUI Address Mask Description

0001-e300-0000 ffff-ff00-0000 Siemens phone

0003-6b00-0000 ffff-ff00-0000 Cisco phone

0004-0d00-0000 ffff-ff00-0000 Avaya phone

000f-e200-0000 ffff-ff00-0000 H3C Aolynk phone

0060-b900-0000 ffff-ff00-0000 Philips/NEC phone

00d0-1e00-0000 ffff-ff00-0000 Pingtel phone

00e0-7500-0000 ffff-ff00-0000 Polycom phone

00e0-bb00-0000 ffff-ff00-0000 3Com phone

# Display the voice VLAN state.

[DeviceA] display voice-vlan state

Current Voice VLANs: 2

Voice VLAN security mode: Security

Voice VLAN aging time: 30 minutes

Voice VLAN enabled ports and their modes:

Port VLAN Mode COS DSCP

GigabitEthernet1/0/1 2 AUTO 6 46

GigabitEthernet1/0/2 3 AUTO 6 46

Manual voice VLAN assignment mode configuration example

Network requirements

As shown in

Figure 55

:

Device A transmits only voice traffic.