beautypg.com

Displaying and maintaining the private vlan, Private vlan configuration examples, Promiscuous port configuration example – H3C Technologies H3C S5560 Series Switches User Manual

Page 189: Network requirements, Configuration procedure

background image

155

Displaying and maintaining the private VLAN

Execute display commands in any view.

Task Command

Display information about primary VLANs and the
secondary VLANs associated with each primary VLAN. display private-vlan [ primary-vlan-id ]

Private VLAN configuration examples

Promiscuous port configuration example

Network requirements

As shown in

Figure 47

, configure the private VLAN feature to meet the following requirements:

On Device B, VLAN 5 is a primary VLAN that is associated with secondary VLANs 2 and 3.
GigabitEthernet 1/0/5 is in VLAN 5. GigabitEthernet 1/0/2 is in VLAN 2. GigabitEthernet

1/0/1 is in VLAN 3.

On Device C, VLAN 6 is a primary VLAN that is associated with secondary VLANs 3 and 4.
GigabitEthernet 1/0/5 is in VLAN 6. GigabitEthernet 1/0/3 is in VLAN 3. GigabitEthernet

1/0/4 is in VLAN 4.

Device A is aware of only VLAN 5 on Device B and VLAN 6 on Device C.

Figure 47 Network diagram

Configuration procedure

This example describes the configurations on Device B and Device C.

1.

Configure Device B:
# Configure VLAN 5 as a primary VLAN.

system-view

[DeviceB] vlan 5

[DeviceB-vlan5] private-vlan primary

[DeviceB-vlan5] quit