H3C Technologies H3C S5560 Series Switches - Manual (Page 67)

33
Step Command Remarks
2. Set the
system
LACP
priority.
lacp system-priority system-priority
By default, the system LACP priority
is 32768.
Changing the system LACP priority
might affect the aggregation state
of the ports in a dynamic
aggregation group.
3. Create a
Layer 2
aggregat
e
interface
and enter
Layer 2
aggregat
e
interface
view.
interface bridge-aggregation
interface-number
When you create a Layer 2
aggregate interface, the system
automatically creates a Layer 2
static aggregation group
numbered the same.
4. Configur
e the
aggregat
ion
group to
operate
in
dynamic
aggregat
ion
mode.
link-aggregation mode dynamic
By default, an aggregation group
operates in static aggregation
mode.
5. Exit to
system
view.
quit N/A