beautypg.com

Mac address table configuration example, Network requirements, Configuration procedure – H3C Technologies H3C S5560 Series Switches User Manual

Page 50: Verifying the configuration

background image

16

Figure 6 An example for the display mac-address nickname command

MAC address table configuration example

Network requirements

Host A at MAC address 000f-e235-dc71 is connected to interface GigabitEthernet 1/0/1 of Device and
belongs to VLAN 1.
Host B at MAC address 000f-e235-abcd, which behaved suspiciously on the network, also belongs to

VLAN 1.
Configure the MAC address as follows:

To prevent MAC address spoofing, add a static entry for Host A in the MAC address table of
Device.

To drop all frames destined for Host B, add a blackhole MAC address entry for the host.

Set the aging timer to 500 seconds for dynamic MAC address entries.

Configuration procedure

# Add a static MAC address entry for MAC address 000f-e235-dc71 on GigabitEthernet 1/0/1 that

belongs to VLAN 1.

system-view

[Device] mac-address static 000f-e235-dc71 interface gigabitethernet 1/0/1 vlan 1

# Add a blackhole MAC address entry for MAC address 000f-e235-abcd that belongs to VLAN 1.

[Device] mac-address blackhole 000f-e235-abcd vlan 1

# Set the aging timer to 500 seconds for dynamic MAC address entries.

[Device] mac-address timer aging 500

Verifying the configuration

# Display the static MAC address entries for interface GigabitEthernet 1/0/1.