beautypg.com

Network requirements, Configuration procedure – H3C Technologies H3C S5560 Series Switches User Manual

Page 195

background image

161

The trunk promiscuous port GigabitEthernet 1/0/1 is a tagged member of primary VLAN 5 and

secondary VLANs 2 and 3.

The host port GigabitEthernet 1/0/2 is an untagged member of primary VLAN 5 and secondary
VLAN 2.

The host port GigabitEthernet 1/0/3 is an untagged member of primary VLAN 5 and secondary
VLAN 3.

Trunk promiscuous and trunk secondary port configuration
example

Network requirements

As shown in

Figure 49

, configure the private VLAN feature to meet the following requirements:

VLANs 10 and 20 are primary VLANs on Device A. The uplink port GigabitEthernet 1/0/5 on

Device A permits the packets from VLANs 10 and 20 to pass through tagged.

VLAN 11, VLAN 12, VLAN 21, and VLAN 22 are secondary VLANs on Device A.

{

The downlink port GigabitEthernet 1/0/2 permits the packets from VLAN 11 and VLAN 21 to

pass through tagged.

{

The downlink port GigabitEthernet 1/0/1 permits VLAN 22.

{

The downlink port GigabitEthernet 1/0/3 permits VLAN 12.

Secondary VLANs 11 and 12 are associated with primary VLAN 10.

Secondary VLANs 21 and 22 are associated with primary VLAN 20.

Figure 49 Network diagram

Configuration procedure

1.

Configure Device A: