H3C Technologies H3C S5560 Series Switches User Manual
Page 46
12
Figure 3 MAC address tables of devices when Client A accesses AP C
When Client A roams to AP D, Device B learns a MAC address entry for Client A. Device B advertises
it to Device A to ensure service continuity for Client A, as shown in
.
Figure 4 MAC address tables of devices when Client A roams to AP D
To enable MAC address synchronization:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable MAC address
synchronization.
mac-address mac-roaming enable
By default, MAC address
synchronization is disabled.
This manual is related to the following products:
- H3C S5130 Series Switches H3C S5120 Series Switches H3C SR8800 H3C SR6600-X H3C SR6600 H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module