H3C Technologies H3C S5560 Series Switches - Manual (Page 166)

132
Configuring server-assigned MAC-based VLAN
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter Layer 2 Ethernet
interface view. interface interface-type
interface-number
N/A
3. Configure the link type of the
ports as hybrid.
port link-type hybrid
By default, all ports are access
ports.
4. Configure the hybrid port to
forward packets from the
MAC-based VLANs.
port hybrid vlan vlan-id-list { tagged
| untagged }
By default, a hybrid port is an
untagged member of the VLAN to
which the port belongs when its
link type is access.
5. Enable the MAC-based VLAN
feature.
mac-vlan enable
By default, MAC-based VLAN is
disabled.
6. Configure 802.1X or MAC
authentication.
For more information, see Security
Command Reference.
N/A
Configuring IP subnet-based VLANs
In this method, packets are assigned to VLANs based on their source IP addresses and subnet masks. A
port configured with IP subnet-based VLANs assigns a received untagged packet to a VLAN based on
the source address of the packet.
Use this feature when packets from an IP subnet or IP address must be transmitted in a VLAN.
This feature is available only on hybrid ports, and it processes only untagged packets.
An IP subnet-based VLAN has one or multiple subnets to match inbound packets. Each subnet has a
unique index in the IP subnet-based VLAN. All subnets in an IP subnet-based VLAN have the same VLAN
ID.
To configure a IP subnet-based VLAN:
Task Command Remarks
1. Enter system view. system-view N/A
2. Enter VLAN view. vlan vlan-id N/A
3. Associate an IP
subnet or IP address
with the VLAN.
ip-subnet-vlan [ ip-subnet-index ] ip
ip-address [ mask ]
By default, a VLAN is not associated
with any IP subnets or IP addresses.
A multicast subnet or a multicast
address cannot be associated with a
VLAN.
4. Return to system
view.
quit N/A