Wavetronix Click 500 (programmable controller) (CLK-500) - Developer Guide - Manual (Page 9)

8 INTRODUCTION • CLICK 500 DEVELOPER GUIDE
˽ Precision screwdriver
The latest release of the Click 500 software package can be downloaded from the Wavetro-
nix website at www.wavetronix.com/support.
Key Features
Like a compact multi-function tool, the Click 500 has key hardware features that make it
versatile for a large number of applications. In addition, it has several key software features
that make it easy to combine and extend the capabilities of the hardware.
Hardware
The key hardware features include:
˽ 60 MHz C-friendly microprocessor
˽ Four independent physical serial ports
˽ Two contact closure output ports
˽ Two multi-function digital input ports (low-level AC, DC or contact inputs)
˽ Faceplate push-button for menu and operating mode control
˽ Four multi-colored menu LEDs and eight user-programmable LEDs
˽ 1024 K of SRAM memory
˽ 512 K of non-volatile flash memory
˽ Real-time clock with battery backup
˽ A supply voltage alarm monitoring circuit
˽ Interrupt timer
Software
The key software features include:
˽ Dynamic C IDE (Integrated Development Environment)
˽ On-device emulation (provides real time debugging)
˽ Remotely software upgradeable
˽ Programmable without case removal
˽ Easy menu customization
˽ Virtual port connection and configuration
˽ Serial message support
˽ Rapid integration methodology for user-friendly GUI (graphical user interface) con-
trol of program parameters with Click Supervisor
˽ Released binary code for real-world Click and SmartSensor applications