Wavetronix Click 500 (programmable controller) (CLK-500) - Developer Guide - Manual (Page 137)

136 APPENDIX • CLICK 500 DEVELOPER GUIDE
Click 511
The Click 511 is a digital I/O repeater. This product relays digital input information from
up to eight clients back to a single server. The server can then signal the state of the inputs
via contact closure outputs.
Click 512
The Click 512 is a vehicle alert module that works with SmartSensor HD. If one or more
vehicles meet the required conditions, then a contact closure can be sent. SmartSensor HD
event data can also be forwarded to a serial data logger.
Click 513
The Click 513 is a traffic alert module that works with SmartSensor HD. It monitors inter-
val data using a rolling horizon filter. If interval data meets the required conditions, then a
contact closure can be sent. SmartSensor HD interval data can also be forwarded to a serial
data logger.
Click 514
The Click 514 monitors individual vehicle data pushed from SmartSensor HD and forwards
it as tabular ASCII data to serial data logger devices. Gigabytes of data can be organized in
daily or hourly files for examination using popular data analysis tools.
Appendix B - Function Reference Manual
This function reference manual lists all the publically released Click library functions of the
latest build.
Note
If you need help with a function, press CTRL+H after you have selected a function
name. You can also use this to learn more about Click 500 library functions.
ClickBtn Functions
˽ ClickBtnNotPressed
˽ ClickBtnPressed
Clickflash Functions
˽ ClickflashRead
˽ ClickflashWrite