Wavetronix Click 500 (programmable controller) (CLK-500) - Developer Guide User Manual
Page 125
124
CHAPTER 11 • CLICK SUPERVISOR SUPPORT
///////////////////////////////////////////////////////////////
// Click599Config.Lib
///////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////
// Sys Config Default String Module
///////////////////////////////////////////////////////////////
/*** BeginHeader
ClickSupervisorDefaultFirmwareVersion,
ClickSupervisorDefaultSerialNumber,
ClickSupervisorDefaultDescription,
ClickSuperivsorDefaultModuleDescription,
*/
#use click500supervisor.lib
const far char ClickSupervisorDefaultFirmwareVersion
[FIRMWARE_STRING_SIZE+1]
= “C599.01.09.06.18”;
const far char ClickSupervisorDefaultSerialNumber
[SERIAL_NUM_STRING_SIZE+1]
= “CK599-9999999”;
const far char ClickSupervisorDefaultDescription
[DRIVER_DESCRIPTION_STRING_SIZE+1]
= “Custom Application”;
const far char ClickSupervisorDefaultModuleDescription
[MODULE_DESCRIPTION_STRING_SIZE+1]
= “Click! 500 Based Application”;
/*** EndHeader */
///////////////////////////////////////////////////////////////
// Oem Config Module
///////////////////////////////////////////////////////////////
/*** BeginHeader
ClickSupervisorOemConfig0,
ClickSupervisorOemConfig1,
ClickSupervisorOemConfig2,
ClickSupervisorOemResetToFactoryDefaults
*/
#use click500flash.lib