Wavetronix Click 500 (programmable controller) (CLK-500) - Developer Guide - Manual (Page 30)

CHAPTER 2 • iNSTALLING THE dEVELOPMENT TOOLS 29
Figure 2.1 – Configuring the Dynamic C IDE
4 Select Project Options from the Options drop-down menu (see Figure 2.2).
Figure 2.2 – Options Menu
5 Select the Compiler tab from the Project Options window (see Figure 2.3).
Figure 2.3 – Project Options > Compiler Tab
6 Under the Store Program In box, select the flash radio button.
7 Under the Separate Instruction & Data Space box, make sure the Enable separate in-
struction and data spaces checkbox is checked.
8 Click the Advanced button in the lower-right hand corner and the Advanced Compiler
Options window will appear (see Figure 2.4).