Wavetronix Click 500 (programmable controller) (CLK-500) - Developer Guide - Manual (Page 12)

In this chapter
˽ Physical Features
˽ Connecting Power
˽ Serial Communications
˽ Using the DIP Switches
˽ Using Digital I/O
˽ Using the Menu
1
This chapter will explain all of the Click 500 physical features as well as how to use the
interface menu using the push-button on the front of the module. Information will also be
provided on the DIP switches, digital inputs and outputs.
Physical Features
The system diagram of the Click 500 below shows a side-view and front view of the Click
500 (see Figure 1.1). The side label illustration shows placement of the major hardware
components connected to the Click 500 processor.
Using the Click 500
1