Wavetronix Click 500 (programmable controller) (CLK-500) - Developer Guide - Manual (Page 48)

CHAPTER 4 • OPERATING FUNCTIONS AND MENU 47
Submenu 1 Selection Active LED Solid/flashing
1 1st Yellow LED Solid
2 2nd Yellow LED Solid
3 3rd Yellow LED Solid
4 4th Yellow LED Solid
5 1st Yellow LED flashing
6 2nd Yellow LED flashing
7 3rd Yellow LED flashing
8 4th Yellow LED flashing
Table 4.1 – Submenu 1 Selection LEDs
Submenu 2 Selection Active LED Solid/flashing
1 1st Red LED Solid
2 2nd Red LED Solid
3 3rd Red LED Solid
4 4th Red LED Solid
5 1st Red LED flashing
6 2nd Red LED flashing
7 3rd Red LED flashing
8 4th Red LED flashing
Table 4.2 – Submenu 2 Selection LEDs
Example Code 4.1
This example can be found in the Click500ExampleCode folder and is named
“ExampleCode4.1.c.” The purpose of this example is to demonstrate how to construct a
menu with modes and tasks. Setup1 and Mode1 will run upon startup and print the current
state of Selection1 and then the current mode continuously. Task A can be selected to run
using the push-button and LEDs.
Each mode and task performs a different function. TaskA allows you to select the text color
by using Selection1.