SOMFY SONESSE 30 RTS - Manual (Page 85)

QUICK PROGRAMMING FOR TELIS 6 CHRONIS RTS
Copying the Program from One Day to Another
When the program for one particular day is identical to that of another day of
the week, the copy/paste function can be used to copy the entire program that
has already been configured for one day and paste it to another day.
STEP 1: Make sure that the Telis 6 Chronis RTS is in AUTOMATIC MODE (if is in MANUAL
MODE, briefly press the SELECTION button ( ) to switch to AUTOMATIC MODE.
STEP 2: Press and hold the SELECTION button ( ) until "SET" appears on the
screen: AUTOMATIC COMMAND PROGRAMMING MODE is activated, and the day
previously displayed flashes.
STEP 3: Select the day you want to copy using the ARROW buttons or .
STEP 4: When the day to be copied flashes briefly, press the 2 ARROW buttons
and simultaneously: COPY appears.
STEP 5: Select the day to which the program is to be copied using the ARROW
buttons or .
STEP 6: Press both arrow buttons and simultaneously: “PASTE” appears,
the program that was copied is pasted onto this other day.
STEP 7: Press and hold the SELECTION button ( ) to exit SET MODE and return
to AUTOMATIC MODE.
82