SOMFY SONESSE 30 RTS - Manual (Page 80)

QUICK PROGRAMMING FOR TELIS 6 CHRONIS RTS
Adding or Deleting Transmitter/Channel
The procedure for assigning window coverings to the channels of the
Telis 6 Chronis RTS and deleting them is identical. It can only be done
in MANUAL MODE. !
STEP 1: Make sure that the Telis 6 Chronis RTS is in MANUAL MODE (if it is in
AUTOMATIC MODE, briefly press the SELECTION button ( ) to switch to
MANUAL MODE).
STEP 2: Press and hold the PROGRAMMING BUTTON on the individual RTS
transmitter already in memory until the window covering jogs.
STEP 3: Use the ARROW buttons or to select the channel on the Telis 6
Chronis RTS to be programmed.
STEP 4: Briefly press the PROGRAMMING BUTTON on the Telis 6 Chronis RTS:
the window covering jogs and it is assigned to or deleted from the chosen
channel on the Telis 6 Chronis RTS.
In order to assign or delete the window covering from other channels,
repeat steps 1 to 4, selecting another channel. To assign or delete
other window coverings, repeat steps 1 to 4. !
77