SOMFY SONESSE 30 RTS - Manual (Page 83)

QUICK PROGRAMMING FOR TELIS 6 CHRONIS RTS
STEP 5: When EDIT flashes, briefly press the SELECTION button ( ) an
AUTOMATIC ORDER flashes.
Editing an Automatic Order
STEP 6: To create a new AUTOMATIC ORDER: select the blank order using the
ARROW buttons or and go to step 7. (If 6 automatic orders have already
been created, only one of these orders can be modified).
Creating or Modifying an AUTOMATIC ORDER
Selecting the Time
STEP 7: Briefly press the SELECTION button ( ) to confirm the selection: the
time flashes.
STEP 8: Use the ARROW buttons or , to select the twilight option or at
a set time and briefly press the SELECTION button ( ) to confirm the selection.
To edit a twilight time, go to SELECTING THE CHANNELS. To edit a set time, go to
next step.
STEP 9: The hour flashes: to change the hour, press the ARROW buttons or .
STEP 10: Briefly press the SELECTION button ( ) to confirm the hour and then set
the minutes.
STEP 11: The minutes flash: to change the minutes, press the arrow
buttons or .
STEP 12: Briefly press the SELECTION button ( ) to confirm the time and then
set the channels.
Selecting the Channels
STEP 13: Select the channel to be activated using the ARROW buttons or
then briefly press the SELECTION button ( ) to activate (symbol ) or deactivate
(symbol ) the channel (to respond to timed commands).
STEP 14: Press the ARROW buttons or to select another channel and repeat
“STEP 13” to activate or deactivate each channel.
STEP 15: Once the channels have been selected, press the ARROW buttons
or until all 6 channels flash simultaneously.
STEP 16: Briefly press the SELECTION button ( ) to confirm the channel selection
and then set the command.
-To modify an automatic command: select the “automatic command” to be
modified using the ARROW buttons or and go to SELECTING THE TIME.
Selecting the Command to be Sent
STEP 17: An order flashes: to select an command from , , , (on),
(off) press the ARROW buttons or .
The (on) and (off) orders are not displayed when programming
the days of the week if NO SUN (no sun sensors) was selected when the
general parameters of the timer were set.
my
!
80