SOMFY SONESSE 30 RTS - Manual (Page 51)

QUICK PROGRAMMING FOR SUNEA RTS CMO MOTOR
48
Check the Direction of Operation
Press and hold UP or DOWN . When pressing DOWN product
should go down or out. If awning direction does not correspond with UP
or DOWN you must REVERSE the output direction. To reverse output
direction, simply press & hold the (STOP) until the awning jogs. Output
direction should now correspond.
my
STEP 4:
the awning jogs. It will now operate in a maintained fashion. Double check limits
as a precaution. Press and hold the PROGRAM BUTTON on the back of the transmitter until
STEP 1: Bring the awning to your desired UPPER limit with the transmitter.
Press and hold both the (STOP) and DOWN buttons simultaneously
until the awning begins to move down, then release. Stop the motor where
the LOWER limit should be set. You can adjust by pressing the UP or
DOWN buttons.
my
STEP 2: Press and hold both the (STOP) and UP buttons simultaneously
until the awning begins to move up. The motor will stop at the original UPPER
point.
my
STEP 3:
jog (a hard UP limit stop will take place, then release). Press and hold the (STOP) button until the awning performs a long
my
Setting Limits For Standard Retractable Awning
(Both UP and DOWN Limits need to be set)
Setting Limits For Cassette Awnings
(Only DOWN Limit needs to be set.
Automatic Limit is set for UP Limit)
In case of problems with setting of limits during PROGRAMMING MODE,
turn the power off to the motor for 2 seconds and then back on to reset
the motor. Please return to PROGRAMMING MODE to initiate
programming process.
! Limit setting must start from the DOWN or extended position. Do not
start limit setting from the UP position as it is automatically set.
STEP 2:
the UP limit is reached. Press the (STOP) button and stop the awning halfway UP, before
my
STEP 1:
and hold both the (STOP) and UP buttons simultaneously until the
awning begins to move up, then release. Bring the awning to your desired down limit with the transmitter. Press
my