SOMFY SONESSE 30 RTS - Manual (Page 77)

QUICK PROGRAMMING FOR TELIS 6 CHRONIS RTS
At each stage, the parameter to be set flashes.
STEP 1: Press the ARROW buttons or to change the parameter (pressing and
holding the button scrolls the characters faster).
STEP 2: To save the parameter and move to the next parameter, briefly press the
SELECTION button ( ),
STEP 3: REMOTE CONTROL SETTING MODE can be deactivated at any time by pressing
and holding the SELECTION button ( ). Only confirmed parameters are saved.
Setting the General Parameters
When the batteries are first installed, REMOTE CONTROL SETTINGS MODE
is activated directly: SET and YEAR appear on the screen, with the year
flashing (this is the first parameter to be set).
If there is no power supply for an extended period of time (batteries
discharged or removed), the general parameters of the remote control
transmitter will have to be reset. However, automatic commands
remain stored in memory.
!
74