SOMFY SONESSE 30 RTS - Manual (Page 45)

Modulis Only - DOWN
Press momentarily on the (DOWN) button to close the slats.
Press the (STOP) button to stop the movement of the slats.
Modulis Only - UP
Press momentarily on the UP button to open the blind slats.
Press the (STOP) button to stop the movement of the slats.
For precise slat positioning scroll the wheel of the Modulis
transmitter to move the blind slats up or down. The slats will
move in relation to the motion of the wheel on the transmitter.
Press momentarily on the (STOP) button. The slats will start moving and
stop at the pre-programmed (STOP) “Preferred” slat position.
Modulis Only: Using the Scroll Wheel
Activate the Preferred “MY” Position
my
my
my
my
42
™ QUICK PROGRAMMING GUIDE FOR TILT WIREFREE RTS MOTOR
To Delete ALL Transmitter Channels: Using a paperclip, press and hold the
PROGRAM BUTTON located on the motor head casing until blind jogs 2 times
then release.
Resetting all Pre-Programmed Limit Settings & Channels
Programming/Reset Button
To Delete all Previous Settings: Using a paperclip, press and hold the PROGRAM
BUTTON, located on the top of the motor casing until window covering jogs 3
times, then release button. All transmitters and limits will be erased. (Motor is
now reset to FACTORY MODE). Motor limits will need to be reestablished.
Please return to PROGRAMMING MODE to initiate programming process.