SOMFY SONESSE 30 RTS - Manual (Page 54)

QUICK PROGRAMMING FOR GLYDEA RTS
STEP 1: Press and hold the OPEN/UP and CLOSE/DOWN buttons
simultaneously on the RTS transmitter until the drapery jogs.
STEP 1: Press the RTS transmitter OPEN/UP button.
-If the drapery opens, the direction of rotation of correct.
-If the drapery closes, the direction of rotation is incorrect: move to the next step.
STEP 2: Press the (STOP) button until the drapery jogs: the direction
of rotation has been modified.
STEP 3: Press the OPEN/UP button to check the direction of rotation.
my
Recording the RTS Transmitter:
Press the PROGRAMMING BUTTON on the back of the RTS transmitter
until the motor jogs. The RTS transmitter is permanently recorded.
BEFORE YOU BEGIN
Manually move drapery to a middle position along the track.
This allows for movement of the motor in either direction.
Connect Power To Motor
Motors are equipped
with a Nema power plug.
Programming the RTS control point
STEP 2: Briefly press OPEN/UP or CLOSE/DOWN , the drapery automatically
runs to record both hard stop positions.
Checking the direction of operation: Glydea 60e RTS only
DESCRIPTION
2 motors: Glydea 35 RTS, Glydea 60e RTS
AC 120 V with integrated power supply -
10 foot cable
Motor placement left or right and/or
upside down installation (Available 4th qtr)
New touch motion (only on the 60e)
Comes in Dry contact with optional RTS
plug-in module
Standard mounting False Ceiling
Mounting
51