SOMFY SONESSE 30 RTS - Manual (Page 57)

QUICK PROGRAMMING FOR GLYDEA RTS
STEP 1: Press and hold the PROGRAMMING BUTTON of either the
motors receiver or a transmitter already in memory until the drapery
jogs. The motor is now in PROGRAMMING MODE.
STEP 2: Briefly press the PROGRAMMING BUTTON of the transmitter to add
or delete, until the drapery jogs.
To delete all the transmitters programmed and retain limit setting, press
and hold the receivers PROGRAM BUTTON until the drapery jogs twice.
Resetting completely the memory of the motor, press the receiver
PROGRAM BUTTON until the drapery jogs 3 times. All the settings are erased.
STEP 1: Press and hold both the (STOP) and OPEN/UP buttons
simultaneously until the drapery starts to open and close automatically
without stopping.
STEP 2: Press OPEN/UP to increase speed, CLOSE/DOWN to decrease speed
STEP 3: Press the (STOP) button until the drapery jogs to confirm the setting. my
my
54
Adjustment Of Speed Setting:
Glydea 60e RTS only
Adding/Deleting RTS
Deleting Previous Setting
STEP 3: Press the OPEN/UP and CLOSE/DOWN buttons simultaneously
until the drapery jogs to switch from no touch motion to low sensitivity; to
high sensitivity; to high sensitivity and back to no touch motion.
STEP 4: Press the (STOP) button until the drapery jogs to confirm the setting. my