SOMFY SONESSE 30 RTS User Manual

Page 72

Text mode
Original mode

QUICK PROGRAMMING FOR EOLIS 3D WIREFREE WIND SENSOR

™

STEP 6: Test the sensor by pushing up
and down on the awning front bar or
arm until it begins to retract. You
can use the remote to stop the
awning after 5 seconds (first test mode).

STEP 7 : Bring the awning back out
and test it again. You can use the
remote to stop the awning after 5
seconds (second test mode).

Make adjustments to the sensitivity if needed and test it again.

STEP 5: Slide the housing back on
the mounting plate.

STEP 4: Put the sensor electronics
back in the housing.

STEP 3: Adjust the sensor dial to (4).
(1= Most sensitive, 9= Least sensitive)